| Fault Code Description |
|---|
|
A fault occurs when the parking lock actual value (engaged) != driver's choice (disengaged) In addition, the terminal condition must be fulfilled and there should be no electrical fault at the sensor or in the sensor supply voltage. Messages from the gear selector switch must be received by the CAN with no errors. |
| Fault Code Conditions | |
|---|---|
| General Conditions |
7 to 17 V |
| Terminal Condition |
Terminal 15 on |
| Driving Conditions |
No special driving condition necessary; |
| Fault Time Condition |
|---|
|
Filter counter, time-controlled |
| Service Plan |
|---|
|
For fault elimination, it is imperative that you perform the guided troubleshooting procedure. |
| Fault Impact |
|---|
|
* [MSA] The engine is no longer switched off when the vehicle is stationary. * Transmission cannot leave P Trip cannot be continued. |
| Warnings | |
|---|---|
| Warning Lights |
none |
| Control Center Messages | |
| Service Notes |
|---|
|
The emergency release must be deactivated before performing repair measures on the vehicle! |