Fault Code Description |
---|
Diagnosis monitors oxygen-sensor control. The fault is detected when the fuel/air mixture of cylinder bank 1 is too rich and the adaptation limit (30 %) is undershot for 50 s. Possible cause of fault: - Crankcase ventilation defective - Intake manifold pressure sensor before and after throttle valve defective - Fuel tank ventilation valve defective - Catalytic converter clogged - Fuel injector defective |
Fault Code Conditions | |
---|---|
General Conditions |
Voltage condition: - System voltage > 10 V Temperature condition: - Ambient temperature > -10 °C Time condition: - None Other conditions: - Engine on |
Terminal Condition |
|
Driving Conditions |
|
Fault Time Condition |
---|
The fault code is entered when a time interval cannot be specified while certain conditions are met. |
Service Plan |
---|
- Visual inspection of affected components - Locate leaks and rectify - Replace pressure sensors in intake system - Check plug contacts and electrical lines of pressure sensors in intake system - Catalytic converter for one cylinder bank burnt out (visually inspect through probe supports) |
Fault Impact |
---|
Possible noticeable symptoms: - Misfiring Breakdown information: - None |
Warnings | |
---|---|
Warning Lights |
- Emission warning lamp ECE: ON - Emission warning lamp US: ON - Electronic engine output reduction ECE: OFF - Electronic engine output reduction US: OFF - CC-message: NONE |
Control Center Messages |
|
Service Notes |
---|
- None |