Fault Code Description |
---|
The DDE detects an interrupt in the output stage of the fuel filter heating. |
Fault Code Conditions | |
---|---|
General Conditions |
Monitoring is running continuously. Control unit voltage: 9.5 V to 16 V. |
Terminal Condition |
|
Driving Conditions |
Fault Time Condition |
---|
The fault is entered if it is present for longer than the following period (debounce time): between 500 ms and 5000 ms (version-dependent). |
Service Plan |
---|
1. Check line and plug connections 2. If wires and plug connections are OK: Replace fuel filter heating. |
Fault Impact |
---|
Possibly poor engine starting at low ambient temperatures. |
Warnings | |
---|---|
Warning Lights |
None |
Control Center Messages |
Service Notes |
---|
- |