| Fault Code Description |
|---|
|
The diagnosis monitors the lines of the five position sensors. Malfunction monitoring conditions Technical details are not relevant for troubleshooting in Service. |
| Fault Code Conditions | |
|---|---|
| General Conditions |
Voltage precondition - Vehicle voltage between 9V and 16V Temperature condition - None Time condition - None Other preconditions - None Terminal status - Terminal 15 |
| Terminal Condition |
|
| Driving Conditions | |
| Fault Time Condition |
|---|
|
The fault is entered immediately. |
| Service Plan |
|---|
|
- 0x2DD6: Program DME if integration level is less than 10-09-511 - 0x135808: Program DME if integration level is less than 10-09-511 ‐ Check wiring harness between Valvetronic servomotor and DME - Replace Valvetronic servomotor. Then perform running-in phase. |
| Fault Impact |
|---|
|
- The load is controlled via the throttle valve (full driving capability/power) |
| Warnings | |
|---|---|
| Warning Lights |
none |
| Control Center Messages | |
| Service Notes |
|---|
|
- None |