| Fault Code Description |
|---|
|
Monitoring the resistance of the ignition squib on the ignition circuit. The resistance is above the defined resistance value. |
| Fault Code Conditions | |
|---|---|
| General Conditions |
Supply voltage between 9 and 18.5 volts. |
| Terminal Condition |
Terminal 15 on |
| Driving Conditions |
|
| Fault Time Condition |
|---|
|
The fault must be actively applied for at least 3 seconds in order to be entered in the fault memory. The fault can be deleted from the fault memory if no longer active for at least 10 seconds. |
| Service Plan |
|---|
|
1) Check the resistance of the ignition squib. 2) Check whether plug connection is fitted correctly; open connection 3) Check the entire line routing of both lines of the ignition circuit for interruption. |
| Fault Impact |
|---|
|
|
| Warnings | |
|---|---|
| Warning Lights |
Check control message: Faulty airbag function The airbag indicator light is constantly on after the fault has been set. The airbag indicator light is activated immediately the next time the system is switched on. The airbag indicator light goes out when deleting the fault memory (fault currently not present). |
| Control Center Messages | |
| Service Notes |
|---|
|
|