| Fault Code Description |
|---|
|
The fault is detected if the SOLL_MOM_ANF message is not received. |
| Fault Code Conditions | |
|---|---|
| General Conditions |
The following preconditions must be fulfilled: - The message must be active. - Terminal 15 must be active. The signals are sent cyclically every 200 ms. The fault is checked at 100 ms intervals. Control unit voltage: 9.5 V to 16 V. |
| Terminal Condition |
|
| Driving Conditions | |
| Fault Time Condition |
|---|
|
The fault is entered if it is present for longer than the following period (debounce time): between 100 ms and 200 ms (depending on the version). |
| Service Plan |
|---|
|
- Carry out CAN/FlexRay bus system analysis. |
| Fault Impact |
|---|
|
None |
| Warnings | |
|---|---|
| Warning Lights |
None |
| Control Center Messages | |
| Service Notes |
|---|
|
- |