Fault Code Description |
---|
The diagnosis monitors teaching of the limit position of the electrical wastegate valve. Fault monitoring conditions: The fault is detected if the located limit position (open position) is outside the valid range. |
Fault Code Conditions | |
---|---|
General Conditions |
Temperature precondition: - None Time precondition: - None Other preconditions: - A lower limit position was learned as valid. Control unit voltage: 9 V to 16 V. |
Terminal Condition |
Terminal 15 on |
Driving Conditions |
Fault Time Condition |
---|
The fault is entered within 10 seconds. |
Service Plan |
---|
- Check linkage (stiff movement, damage and wear). - Check setting of linkage with system test. - Replace electrical controller drive, wastegate valve. |
Fault Impact |
---|
- None |
Warnings | |
---|---|
Warning Lights |
None |
Control Center Messages |
Service Notes |
---|
- None. |