| Fault Code Description |
|---|
|
Monitoring, charging pressure actuator. The charging pressure actuator reports an electrical/mechanical fault or excess temperature at the DDE control unit via the line for position feedback. |
| Fault Code Conditions | |
|---|---|
| General Conditions |
Continuously every 10 ms, provided that offset learning is not active. Control unit voltage: 9.5 V to 16 V. |
| Terminal Condition |
|
| Driving Conditions | |
| Fault Time Condition |
|---|
|
The fault is entered if it is present for longer than the following period (debounce time): 220 ms |
| Service Plan |
|---|
|
1. Check heat shielding/cooling of turbocharger. 2. Check charging pressure actuator for ease of movement, if necessary replace exhaust turbocharger. |
| Fault Impact |
|---|
|
Allow vehicle to cool down. Visit your nearest BMW Service Centre. |
| Warnings | |
|---|---|
| Warning Lights |
None |
| Control Center Messages | |
| Service Notes |
|---|
|
- |