Fault Code Description |
---|
The adjustment value of the nitrogen oxide sensor after SCR catalytic converter is being monitored. The fault is detected if the taught-in adjustment value exceeds the limit value. Limit value: 30 ppm |
Fault Code Conditions | |
---|---|
General Conditions |
Control unit voltage: 9.5 V to 16 V. |
Terminal Condition |
|
Driving Conditions |
Fault Time Condition |
---|
The fault is entered if it has been detected more than the following number of times (fault debouncing counter): 65535 |
Service Plan |
---|
Replace nitrogen oxide sensor after SCR catalytic converter. |
Fault Impact |
---|
Warnings | |
---|---|
Warning Lights |
None |
Control Center Messages |
Service Notes |
---|
If a nitrogen oxide sensor is replaced, the following service function must be carried out: SCR system adjustments and adaptations, SCR exhaust emission sensor system. |