Fault Code Description |
---|
Fault Code Conditions |
---|
Fault Time Condition |
---|
DME: Mixture control |
Service Plan |
---|
Fuel Control System 'A' Too Lean at Idle (Bank 1) |
Fault Impact |
---|
Voltage condition: - Electrical system voltage > 10 V Temperature condition: - Ambient temperature > -10 °C Time condition: - None Other conditions: - Engine on - Adaptation active none The fault is recognized when the mixture for Bank 1 is too lean and the adaptation limit (25...30 %) is exceeded for 40 sec. Potential problem source(s): - Defect in wiring harness - Defective rail-pressure sensor - HFM defective - Leakage in induction tract - Leak in exhaust system - Catalytic converter clogged - Defective injector - Defect in high-pressure system |
Warnings |
---|
Service Notes |
---|
- Check induction tract for leaks - Check exhaust system for leaks - Check wiring harness between DME and HFM - Check wiring harness between DME and rail-pressure sensor - Replace rail-pressure sensor - Replace HFM - Replace fuel injector - Replace high-pressure pump |