| Fault Code Description |
|---|
| Fault Code Conditions |
|---|
| Fault Time Condition |
|---|
|
DME: DMTL, system fault |
| Service Plan |
|---|
|
Diagnostic Module Tank Leakage (DM-TL) Pump Current Too High |
| Fault Impact |
|---|
|
Voltage condition: 10.95 V < electrical system voltage < 16 V Temperature condition: None Time condition: None Other conditions: none none The fault is recognized when the current draw exceeds 40 mA. Potential problem source(s): - DMTL (leakage diagnosis pump) defective |
| Warnings |
|---|
| Service Notes |
|---|
|
1. If DTCs related to the DMTL Diagnostic Module for Tank Leaks are logged delete all trouble codes from the error memory 2. Perform DMTL operational check 3. If the fault cannot be reproducd in the DMTL operational check terminate the repair procedure! 4. If the fault can be reproduced with the DMTL operational test, then replace the DMTL. |