| Fault Code Description |
|---|
| Fault Code Conditions |
|---|
| Fault Time Condition |
|---|
|
DME: VANOS intake |
| Service Plan |
|---|
|
'A' Camshaft Position - Timing Over-Retarded (Bank 1) |
| Fault Impact |
|---|
|
Voltage condition: Electrical system voltage above 10 V Other conditions: - Start process terminated, engine running Terminal 15 Engine temperature between 0°C and 110°C Oil temperature less than 120 or 134°C, varies according to engine speed No travel limit adaptation fault after power failure on the respective cylinder bank No travel limit adaptation fault on the respective cylinder bank Camshaft flank recognized Specified VANOS value between 70° and 120° |
| Warnings |
|---|
| Service Notes |
|---|
|
1. Check VANOS solenoid valve for contamination, if serious contamination is present remove filter screen with tab 2. Install new solenoid valve (valve sticking) 3. Replace VANOS assembly 'Always proceed step-by-step - Check system after each step (clear control module fault memory and test operation)' |