| Fault Code Description |
|---|
| Fault Code Conditions |
|---|
| Fault Time Condition |
|---|
|
Exhaust camshaft 2, tooth offset to crankshaft |
| Service Plan |
|---|
|
Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor B) |
| Fault Impact |
|---|
|
none KL_15 = true One-Tooth-Off detection on bank 2 exhaust (if OK: Vsa2_adp delta for last driving cycle < 16°KW (Dnwoto_mn/mn)) VANOS must be against travel stop, thus Vsa2_sprs=120°KW. |
| Warnings |
|---|
| Service Notes |
|---|
|
Test sequence (after each step stop to determine whether fault is present): 1. If entry for corresponding camshaft sensor is present, start by checking camshaft sensor 2. Check solenoid valve for contamination / inspect terminals 3. Cross-change solenoid valves 4. Check/correct camshaft and valve timing and/or alignment 5. Replace VANOS servo unit 6. Install new timing chain assembly (complete) |