| Fault Code Description |
|---|
|
The fault entry only serves as an indicator that transport mode is set. This does not relate to a control unit fault. |
| Fault Code Conditions | |
|---|---|
| General Conditions |
Supply voltage between 9 and 16 volts. |
| Terminal Condition |
Terminal 15 on |
| Terminal Condition |
PRD status: Driving |
| Terminal Condition |
PRD status: Residing |
| Driving Conditions |
Note: The designations of terminal status or PWF status apply according to the vehicle electrical system of the vehicle. |
| Fault Time Condition |
|---|
|
Transport mode was activated through diagnosis. |
| Service Plan |
|---|
|
Carry out the following service function: Delete transport mode. |
| Fault Impact |
|---|
|
The control unit is not ready for operation or only to a restricted extent. Interior light without functionNo display on CIDNo audio playbackHeating and air conditioning system and heated rear window functions restricted or completely unavailable. |
| Warnings | |
|---|---|
| Warning Lights |
|
| Control Center Messages | |
| Service Notes |
|---|
|
Transport mode must only be active during transport of the vehicle from the works to the authorized dealer. Transport mode must be deactivated as part of the pre-delivery check. |