Fault Code Description |
---|
Fault Code Conditions |
---|
Fault Time Condition |
---|
Valvetronic, eccentric shaft sensor: power supply |
Service Plan |
---|
VVL-Sensors Supply Voltage Circuit High (Bank 1) |
Fault Impact |
---|
Electrical system voltage terminal 87 >10.0 V Terminal 15 ON Monitoring of voltage supply to excentric shaft Nominal value for voltage supply sensor = 5.0V |
Warnings |
---|
Service Notes |
---|
1. Check sensor power supply voltage with multimeter. Supply voltage must lie between 4.75V and 5.25V. 2. If result is outside specified range: Check power-supply wire to VVT sensor and check plug. 3. If contact is stretched or corroded: Replace plug on VVT sensor 4. If wiring harness is defective: Replace wiring harness between DME and VVT sensor. |